No-Spill Spout™ ~ No mess. No Spill. No Problem. (Canceled)
No-Spill Spout™ ~ No mess. No Spill. No Problem. (Canceled)
The No-Spill Spout™ is a simple, patent pending design that makes pouring 1 gallon jugs easy as 1-2-3. No Mess. No Spill. No Problem.
The No-Spill Spout™ is a simple, patent pending design that makes pouring 1 gallon jugs easy as 1-2-3. No Mess. No Spill. No Problem. Read more
Our new, patent-pending technology is a simple, elegantly-designed spout that pours perfectly every time! The No-Spill Spout attaches to over 65 different brands of 1 gallon refill containers.
With your help, we're going to bring the perfect solution to irritating liquid spills, for decades people have put up with obnoxious stains, spills and blemishes due to poorly-designed liquid bottles.
Large liquid jugs straight from the store are notorious for being difficult to pour. Puddles on the washing machine, counter, and shop floor not only make an annoying mess that requires dedicated cleaning, but can ruin clothes, harm children and pets, and continue to cause you headaches for weeks and months to come.
It's time to introduce the world to the "No-Spill Spout™" the simple-yet-effective tool to save time, money, and keep everything clean!
STEP 1) Screw on the No-Spill Spout™
STEP 2) Remove the Cap
STEP 3) POUR
We have found that this spout can work flawlessly in virtually any environment pouring virtually any domestic, automotive, marine, and commercial products, including:
• Industrial Cleaners
• Dish Soap
• Lubricants and Oils
• Radiator Fluid
• Windshield Wiping Fluid
• Many, many, many, many more...
The No-Spill Spout™ works perfectly with products from the following brands:
The genius of the No-Spill Spout™ is the two-tier dispenser system that prevents liquid from "glugging," flowing out of the bottle in spurts, and splashing all over your clothes, counters, and laundry room floor.
• Versatile applications
• Safety cap for easy storage
• Low-priced & Lightweight
• Multi-gallon reusability
• Peace of Mind – Your clothes and counters won't get ruined by unsightly liquid stains again
The secret of the No-Spill Spout™ is in the patent-pending design. The first vent allows for the passage of the liquid. While the second vent allows air to enter to container, allowing for a smooth and easy pour every time.
The simple little cap keeps your product safe from spills while in storage. You can save and reuse the No-Spill Spout™ as many times as you’d like.
This simple, intuitive technology screws onto any conventional liquid bottle, making a convenient spout for pouring every time. Simply screw it on, remove the cap, and pour, our patent-pending technology regulates the flow of liquid and dispenses only as much as you want.
Our No-Spill Spout™ spouts are fantastic because they are inexpensive, lightweight, versatile and can be reused on successive bottles for years at a time. When your liquid jug is all used up just save the spout and use it again!
About two years ago inventor Joseph Hill was doing some laundry and spilled bleach on one of his favorite shirts. You know how you try to pour from a bleach bottle into that tiny opening on your washing machine and before you know it there’s bleach everywhere, on the floor, on your clothes, running down the side of your machine?
This had happened so many times that Joe decided he’d had enough. There had to be an easier way to do this. So he got to work.
He experimented with all kinds of ideas. Funnels, complicated hoses, and weird spout shapes. Joe's background is in the visual arts, so he knew there had to be a way to design a device that was simple, efficient and easy on the eye. He spoke with a lot of designers, engineers, and experts.
Finally, he consolidated everything down to a very simple design: The No-Spill Spout™.
The best part, is that once he finalized the design his wife started pulling bottles from the laundry room, kitchen, and garage.
"Check this out!" she said, "It fits all these bottles!"
And, of course, she was right. There are literally hundreds of applications for this product. Pretty much any time you need to pour from a large bottle, the No Spill Spout will help you out!
We are extremely excited to get this project off the ground. Partnering with inventor Joseph Hill's extremely successful fine art printing company Prolab Digital, we are able to offer some pretty unique rewards for backers of this project. Check them out!
You can check pdiart.com for more images.
We have producers and distributors lined up to make this fantastic product available to households all over the world. What we initially need are 3- 1 Cavity molds for the Blow Molding and Injection Molding plastics fabricators to produce the No-Spill Spout™. The molds are not cheap to produce, and our initial expectation to have the 3 molds made will cost around $15,000. This 1 cavity mold will allow us to work out all of the bugs, if any, in the manufacturing process prior to us ordering the mass production molds that will be required to fulfill very large orders. The initial estimates for 3- 8 Cavity molds will run close to $150,000.00 and ideally if this Kick Starter Campaign is successful we will have received enough funds to cover the cost of these 3 molds as well.
The No-Spill Spout™ will be manufactured in America.
Based on the success of the No-Spill Spout™ Kick Starter Campaign, our stretch goals will include purchasing the Injection Mold and Blow Mold equipment to manufacture the No Spill Spout ourselves.
Once the mold is made we can begin scale production in earnest, and get to work developing some of the other time and money saving products we have dreamed up!
Joseph M. Hill, Inventor
5441 W. 104th St. Los Angeles, CA 90045
Risks and challenges
Prolab Digital has been operating successfully as a large format digital imaging printing company for the past 25 years. As the primary operations manager and visionary leader for the company, we have built a solid team that works together to handle the daily and multi-daily fires that occur. We have been called "Firemen" due to the fact that we have been "pulling clients out of burning buildings" There is not a day that goes by that a client crises that becomes your crises because of their poor planning.
Our current 15,000 sq/ft manufacturing facility is located by the LAX Airport and we operate 18 hours a day using millions of dollars worth of large format digital printing equipment. Please come visit our facility at prolabdigital.com Monday to Friday, 9am to 5pm and we also suggest you read our yelp reviews and see what our current clients think of us.
Because of our 25 years of running a very complex and demanding business, we have already began searching and finding the best consultants in the plastics industry and have formed relationships with them to help layout the road map to success in the plastics injection and blow molding arena. These are individuals with decades of experience and have written the books many others are using to find their way in the plastics world.
We are have already starting receiving back the quotes from several of the mold makers that we sent the RFP (request for proposal) from across the globe. I figured we might as well know what is what and from where we find the best product for the best price.
There are several injection molding and blow molding companies we have already interviewed in the Greater Los Angeles area and are very confident in their decades of operating history that their current setup and equipment will easily produce the No-Spill Spout™ without any problems. The beauty in our product is that we are producing a very simple plastic part that is highly functional and serves an amazing useful purpose.
PROLAB Digital already has long standing relationships with several large commercial printing press companies when the time comes to produce the printed packaging for the retail sales of the No-Spill Spout™. And the estimates for the printing make me very happy, nice and cost effective.
We have already met with Toshiba regarding their injection molding making equipment and we are very excited about the reliability and precision their equipments operate. Ultimately we will bring the full manufacturing of the No-Spill Spout™ in-house so that we can provide higher standard of living for our employees and keep the jobs we provide in America. To us, this is the most important action we can possibly ever do. We are American's, and proud to say, "Made in America."Learn about accountability on Kickstarter
- (30 days)