$11,070
pledged of $500pledged of $500 goal
213
backers
20days to go

All or nothing. This project will only be funded if it reaches its goal by Wed, October 10 2018 3:59 PM UTC +00:00.

$11,070
pledged of $500pledged of $500 goal
213
backers
20days to go

All or nothing. This project will only be funded if it reaches its goal by Wed, October 10 2018 3:59 PM UTC +00:00.

About

Gloomhaven Scenario 1 - Miniatures are property of Cephalofair Games
Gloomhaven Scenario 1 - Miniatures are property of Cephalofair Games

3d printable hex tiles, perfectly compatible with Gloomhaven or any RPG, as well as Shadespire and other hex based games by scaling up the tiles.

Adventuring in multiple universes often takes us to fantastic places, 3d printing has made it possible to bring the worlds from our imaginations to the table. There are already many systems which create fantastic dungeons, caverns, towns and forests; however all of these systems use square based grids. Squares are very good for some things, making a rectangular room is easier to imagine than adding walls to a hex grid, however this set has a new way to make easy walls while also taking the many advantages of a hex grid which are:

  • No diagonal movement - fair and more natural movement
  • 1 hex based module - more configurations and more possible builds
  • Adjacency - No diagonal attacks, every slot available to attackers is clear
  • Natural Formations - Hexes present a more natural shape so they adapt better to natural formations
  • Irregular Rooms - whenever there is a skew wall squares tend to have too much unused space, with hex grids you can do walls in every 8 directions with our wall system.
  • Easier Spells - some spells have a much easier way to calculate the appropriate area of effect.

These are only some of the advantages, if you want to convert to hex d20SRD has some other pointers. 

This set uses Printable Scenery's Openlock design. Their design is well known and has been open from the get-go, this has let a ton of people grow the community and make some incredible designs. If you like this set please visit their page to look at what they have. I am also working on a solution to make the sets more compatible and have some connection tiles, go from squares to hexes!

Texture Sets

This campaign has 4 base sets, and one trap and decoration bundle, Most of the sets include at least 1 tile per available frame, one wall per wall length and a column. Most have more options that will be listed below.

The Dungeon Set has a complete set, plus some extra broken walls and floors with moss and a more broken stone.

The Cave set has extra wall textures to make your caverns look more realistic.

The Tavern set has an extra set of "inn" walls with stucco to give some wall variety.

The Grassland set has 3 full sets of floors, grass, mixed and dirt, this way you can make roads and transition tiles easily.

With over 45 different decorations and traps, this is the perfect addition to liven up your dungeons and make them look more populated. includes some tiles that snap on to the frame system. 

Pledge Levels

This campaign has only 4 different pledge levels and they are all pretty easy to understand.

Add-ons

All add-on sets are affected by stretch goals! This means that they will be as big as the core sets and that they are growing as we unlock more stretch goals!

lava pools, molten rock and boulder cave walls
lava pools, molten rock and boulder cave walls
Water, Ice and Crystal cave and water transition tiles for every set
Water, Ice and Crystal cave and water transition tiles for every set

Stretch Goals

If you have been with me on my other campaigns you know how stretch goals work. otherwise here is a small description. Most stretch goals unlock content for EVERY texture set, so you will be getting at least 4 more files per stretch goal broken. Some will have less but on very specific circumstances. I will upload stretch goals as we break them, but limited to once daily, to let my artist catch up, so that means there will be more updates even on slow days to catch up with the first few days of campaign. 

*All double height walls, are going to be cut down to be used as 1'' walls as well, so the set is focused on that height which is more game-friendly. However we want to also be able to to multi-level eventually, so here is where the "double height" walls will shine.

The Axolote Hex System

Delivery

The base sets, as well as the Traps and Decor set will be uploaded as soon as the funds are collected (two weeks after the KS ends) that way you can get started printing frames and also all you need to play Gloomhaven (in case that is why you joined this campaign). 

After that every stretch goal will take one extra week and will be delivered in a monthly bundle (depending on how many SG are broken), there will be an update twice a month, one to show the work in progress and one to show the full set and let backers know that the updated files are up. 

This way of delivery should be smoother than what i have done in the past where i have tried weekly uploads that ultimately mess up my work schedule and i cant keep up. The workload is the same but this way I can get everything done faster in the month and then iron out the issues before actually uploading things.

Gallery

top down shot of the printed map of scenery 1 Gloomhaven
top down shot of the printed map of scenery 1 Gloomhaven

3d print settings

doors taken off from walls, leaving open spaces.
doors taken off from walls, leaving open spaces.

Renders of the test with all textures.

cave pool from the Ice cave add-on
cave pool from the Ice cave add-on
Lava room from the Lava Cave add-on
Lava room from the Lava Cave add-on

Everything printed and tested for this KS was done with .25 mm layers (250 microns) all of the fitting parts and thresholds were done with this measurements. In order to get better results please use intervals of this measurement (125 microns for double quality) most printers should be able to handle that measurement. 

  • Material - PLA
  • Layers - 250 microns
  • Extruder Temp - 205 C
  • Bed Temp - 50 C
  • Speed - 50 mm/s

New to 3d printing?

If you are new to 3d printing there are many sources to get more information and get started. If you want to start with a low budget and go from there I recommend the Creality3d Ender 3.  It is a sub $200 printer, it does come in a kit and will require you to build it, I built my first printer with little knowledge and just following the instructions. 

If your budget allows for more i would go for a Prusa i3 Mk3, this printer has incredible quality out of the box and a number of great features to get better quality and better prints in general.

License 

Risks and challenges

The biggest risk with this as well as all of my other KS is that it grows too big for me to handle it (i mostly work alone). However as stated before on my campaigns i have some friends that could help me in case the workload becomes too big.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Make a pledge without a reward

    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge US$ 1 or more About US$ 1.00

    Tavern Regular

    Join the comments, the fun and follow the campaign to get updates and see how far we get!

    Less
    Estimated delivery
    20 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $15 or more About $15

    Dungeoneer

    Get the bundle of traps and decorations! over 45 individual files to add some volume to your maps.

    **All files will be delivered in digital .stl format files, scaled and ready for printing.

    Includes:
    • Traps & Decorations
    Less
    Estimated delivery
    13 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge US$ 40 or more About US$ 40

    Adventurer

    Get the base 4 sets for building hex dungeons including all unlocked stretch goals and the base frames

    *October Delivery will include all the files without stretch goals, those will be delivered in updates made to the download file directly from DrivethruRPG

    **All files will be delivered in digital .stl format files, scaled and ready for printing.

    Includes:
    • Dungeon Set
    • Cave Set
    • Tavern Set
    • Grassland Set
    Less
    Estimated delivery
    4 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $50 or more About $50

    Dungeon Delver

    Get the 4 base textures for the Hex system and the 'Traps and Decor' together.

    *October Delivery will include all the files without stretch goals, those will be delivered in updates made to the download file directly from DrivethruRPG

    **All files will be delivered in digital .stl format files, scaled and ready for printing.

    Includes:
    • Dungeon Set
    • Cave Set
    • Tavern Set
    • Grassland Set
    • Traps & Decorations
    Less
    Estimated delivery
    145 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge US$ 110 or more About US$ 110

    Explorer of the Far Realms

    Get the 4 base textures for the Hex system, the 'Traps and Decor', 4 add-on tile sets, and 2 add-on nature sets together. *October Delivery will include all 4 base sets and traps and decor the files without stretch goals, those will be delivered in updates made to the download file directly from DrivethruRPG **All files will be delivered in digital .stl format files, scaled and ready for printing.***add-on sets will be delivered in batches in later dates check the FAQ for an estimated timeline of deliveries.

    Includes:
    • Dungeon Set
    • Nature - Trees
    • Dwarven City Set
    • Elven Kingdom Set
    • Ice Cave Set
    • Lava Caves Set
    • Traps & Decorations
    • Grassland Set
    • Tavern Set
    • Cave Set
    • Nature - Ravines and Bridges
    Less
    Estimated delivery
    30 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.