Share this project

Done

Share this project

Done
Conceptual designs and a discussion around the G.I.Joe®: A Real American Hero™ brand 1982-1994.
Conceptual designs and a discussion around the G.I.Joe®: A Real American Hero™ brand 1982-1994.
269 backers pledged $18,722 to help bring this project to life.

About this project

3.75" Joe: Creating G.I.Joe ®: A Real American Hero™ Vol. 4 project video thumbnail
Replay with sound
Play with
sound
  • Off
    • English

$18,722

269

G.I. Joe® * is one of the most recognizable and well known action figure lines in history, yet there is no full story showing the creation process of the G.I. Joe®: A Real American Hero™ brand that ran from 1982-1994.

What are you pledging towards?

The release of "3.75 Inch Joe: The Special Forces Team that forged an American Hero" book series, Volume 4! The fourth book in the series, “3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)” is an 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts! This fully colored book will be printed on 100# paper in a Soft Perfect Bind format with a visible spine like a graphic novel. Although there have been many books written about G.I. Joe®, what makes "3.75 Inch Joe: The Special Forces Team that forged an American Hero" series unique is the fact that the information shared within the book comes from exclusive interviews with former employees who worked on the G.I. Joe® brand. Some of the things to expect include: • The inspiration and influences behind the different figures and vehicles straight from the designers' point of view... • Alternate names for figures and vehicles pulled from Larry Hama's dossiers or from the original concepts themselves... • Insider stories from former employees ranging from Marketing to Engineering regarding the changes that occurred during the design process... • Conceptual designs and photographs that will show the progression and different stages of creating a figure or vehicle. This includes concept pencils and inks, sculpture sheets, color studies, color presentation art, models, and much much more!


Which characters and vehicles will be included in Volume 4?

•Zap • Zap & S.N.A.K.E. • Gung-Ho • Scrap-Iron • Manta and S.H.A.R.C. • Deep Six • Firefly • Ferret • Dusty • Tele-Viper • B.A.T.• Sci-Fi • Motor Viper • Sea Slug and Steam-Roller • Mobile Command Center • Croc Master• Muskrat • Ghostrider• Phantom X-19 • Astro-Viper • Rock & Roll • Frag-Viper • Hammer • S.A.W. Viper and Rock-Viper • Attack Cruiser • Mercer and Tracker• Monstro-Viper and Bio-Viper • Spasma • Alpine Trooper and Badger (unreleased figure and vehicle concepts)• Tiger Man and Unknown character (unreleased figure concepts) • Grizzly (unreleased vehicle concept)  

SPECIAL NOTES:  

• Zap (2 separate spreads…3 pages total) (includes 1st page of the S.N.A.K.E.  

• S.N.A.K.E. (2 separate spreads…3 pages total) (includes the 3rd page of Zap)  

• Firefly (2 separate spreads…4 pages total)  

• Mobile Command Center (3 separate spreads…6 pages total)


Which characters and vehicles were included in Volume 3?

• Breaker • MOBAT • Steeler • Torpedo • Baroness • Copperhead • Airtight • Snow Serpent • Beach Head • Cross-Country • Dr. Mindbender • Cobra-La • Golobulus and Royal Guard • Nemesis Enforcer • Repeater • Iron Grenadier • Stiletto • Star-Viper • Razorback• Wild Boar and Track Viper • Vapor and Coldfront• Avalanche • Salvo • Low-Light and Big Ben • Blockbuster • Cobra Revenge (unreleased vehicle concept) • Cobra Wedge and Sea Hawk (unreleased vehicle concepts) • Baroness (unreleased figure concepts) • Iguanus (unreleased figure concept) •

SPECIAL NOTES:  

• Breaker (2 separate spreads…4 pages total)  

• MOBAT (3 separate spreads…6 pages total)  

• Airtight (2 separate spreads…3 pages total)  

• Snow Serpent (2 separate spreads…3 pages total)  

• Avalanche (2 separate spreads…4 pages total)

Rewards:

There will be 11”X17” prints available of the two-page spreads which will be printed on 100# paper. They will display beautifully framed or in a shadow box where you can also display your favorite Joe or Cobra toy that fits within these dimensions! (page numbers will be removed)

Dusty 2 page spread
Dusty 2 page spread

 

Mobile Command Center 2 page spread
Mobile Command Center 2 page spread

Stretch Goal:

$19,500 - Book Sleeve 

As an added bonus to everyone who either pledges towards all 4 books this time around or have pledged/purchased the previous 3 books in the past, you will get this amazing book sleeve to encompass the Part 1 (4 Volumes) of the 3.75” Joe Series. The sleeve will allow you to bundle together Kirk Bozigian’s “History of G.I. Joe” portion of the book series. 

Shown is a blank sample holding 4 books! I hope to show the sleeve design this weekend! Thank you again for your support!

 

 

Where did this project come from?  

Although I purchased my first few pieces of pre-production artwork in 2005, it was not until 2009 that I got the idea of exploring the origins of the G.I. Joe®: A Real American Hero™ brand. The concept of the book was to learn more about the process of making G.I.Joe ® at that time and recognizing all the individuals who participated in its creation and continued success from 1982-1994. The book concept itself did go through several changes over the last few years, but it eventually came back to my original idea of showcasing the original designs and any stories related to them or the product itself.  

To make the book series more affordable, I made the decision to break it down into smaller volumes. My goal going forward is to release 1-2 volumes a year. Although the format will look similar in each volume, the content will be different.  

Written by Kirk Bozigian, former Vice President of Hasbro Boys Toys, the introduction to the first four volumes will start with a look into the origins of G.I.Joe ® in 1964 and will lead into the steps taken to re-launch G.I.Joe ®: A Real American Hero in 1982.

Why do we need this book?  

According to New York Toys and Hobby World, the 1985 series of G.I.Joe was ranked the best selling toy in America. The Complete Encyclopedia to G.I.Joe, by Vincent Santelmo, states it was estimated that, “Hasbro sold the equivalent of two G.I.Joe/Cobra series figures to every boy in the nation between the ages of 5-12” in 1986”.  

 When it comes to the G.I.Joe: A Real American Hero era, there have not been books produced like the ones I have completed and the ones I continue to work towards releasing. When you look at society today and the draw toward collecting, many people prize things they either owned or have fond memories of from their childhood. It does not matter what people collect, people like to revisit their childhood and escape from reality and the stresses of today’s world. For those of us who played with G.I.Joe in the 1980s and 1990s, my book will allow you to tap into those memories and appreciate the amount of creativity, time, and energy it took to make G.I.Joe: ARAH an iconic toy brand.

Do you need to be a G.I. Joe enthusiast to enjoy this book?  

The answer is simply, no. This book appeals to anyone who enjoys learning the process of toy design, industrial design, product design, engineering, marketing, as well as many other disciplines involved in developing a product. It should also appeal to fans of the comic industry seeing that several of the designers who worked on G.I. Joe in the late 1980s and into the 1990s were graduates of The Kubert School, a school founded by comic artist and teacher, Joe Kubert!  

What is the plan and what is the schedule?  

Once the campaign is funded, the pledges will take approximately two weeks to process. Once they have been processed, the order will then go to the printer, who will need 3-4 weeks to print the book. Books and prints will be fulfilled by Steel City Publishing, LLC following the same time frame as shipping for the book.  

*If the Stretch Goal is met and a book sleeve is produced, there may be a slight delay in shipping both the sleeve and book(s). 

Publisher Information and Copyright Information  

Publisher: Steel City Publishing  

*Every effort has been made to locate the copyright holders of some select material used in this book. Should there be any omission, we apologize and shall be pleased to make the appropriate acknowledgements in future editions. No part of this book may be reproduced in any form without written permission from the publisher. Neither the author nor the publisher are sponsored by or associated with Hasbro, Inc., or its affiliates. G.I.Joe, all associated character, vehicle, and group names, and their respective likeliness’s, are trademarks of Hasbro. © 2017 Hasbro. All rights reserved. Hasbro Inc. assumes no responsibility for the content of this book. This book is a result of the author’s independent research on the subject matter and is intended to provide information for collectors. Images shown were provided by those who worked on the G.I. Joe brand and by collectors.  

Images shown were provided by those who worked on the G.I. Joe brand and by collectors.

Risks and challenges

Risks and challenges

I don't expect any delays with the printer. If there are any delays, everyone will be updated. Due to any unforeseen circumstances after the cutoff date of April 27, 2017 for which Steel City Publishing, LLC needs to cease selling the book, a full refund will be provided.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support this project

  1. Select this reward

    Pledge $40 or more About $40

    One Copy of Volume 4

    ONE BOOK:

    - One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’.
    This fourth book in the series is a 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind

    Less
    Estimated delivery
    Ships to Anywhere in the world
    196 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge $60 or more About $60

    One Copy of Volume 4 & 1 print

    ONE BOOK & ONE PRINT:

    - One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’.

    This fourth book in the series is a 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts! This fully colored book will be printed on 100# paper in a Soft Perfect Bind format.

    Have a favorite character or vehicle?

    - Receive 1 print of a page spread** featuring the character or vehicle from Volume 3 or 4. Please see the list of characters and vehicles to the left. This print will be printed on 100# paper and shipped in a mailer tube.

    ** A page spread is considered a side by side layout. This reward is for 1 of these side by side layouts.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    11 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge $75 or more About $75

    A COPY OF VOLUME 3 and VOLUME 4:

    - One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 3)’ and one copy ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’

    These books in the series are each 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind format

    Less
    Estimated delivery
    Ships to Anywhere in the world
    22 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge $75 or more About $75

    Two copies of Volume 4

    2 Copies of VOLUME 4:
    - Two copies of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’.

    This fourth book in the series is a 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind format.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    4 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge $76 or more About $76

    One copy of Volume 4 and 2 prints

    ONE BOOK & TWO PRINTS:

    - One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’.

    This fourth book in the series is a 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind format.
    Have a favorite character or vehicle?

    -Receive 2 prints of 2 separate page spreads** featuring a character(s) or vehicle(s) from Volume 3 or 4. Please see the list of characters and vehicles to the left. This print will be printed on 100# paper and shipped in a mailer tube.

    ** A page spread is considered a side by side layout. There are instances where a figure or vehicle may be more than 2 pages and would be considered as 2 separate page spreads. An example is Firefly. It is made up of 4 pages, which is considered 2 separate page spreads. This reward is for 2 of these side by side layouts.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    4 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge $85 or more About $85

    One copy of Volume 4 and 3 prints

    ONE BOOK & THREE PRINTS:

    -One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’.

    This fourth book in the series is a 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind format.

    Have a favorite character or vehicle?

    -Receive 3 prints of 3 separate page spreads** featuring a character(s) or vehicle(s) from Volume 3 or 4. Please see the list of characters and vehicles to the left. This print will be printed on 100# paper and shipped in a mailer tube.

    ** A page spread is considered a side by side layout. There are instances where a figure or vehicle may be more than 2 pages and would be considered as 2 separate page spreads. An example is Firefly. It is made up of 4 pages, which is considered 2 separate page spreads. This reward is for 3 of these side by side layouts.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    2 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge $88 or more About $88

    One copy of Volume 4 and 4 prints

    ONE BOOK & THREE PRINTS:

    -One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’.

    This fourth book in the series is a 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind format.

    Have a favorite character or vehicle?

    -Receive 4 prints of 4 separate page spreads** featuring a character(s) or vehicle(s) from Volume 3 or 4. Please see the list of characters and vehicles to the left. This print will be printed on 100# paper and shipped in a mailer tube.

    ** A page spread is considered a side by side layout. There are instances where a figure or vehicle may be more than 2 pages and would be considered as 2 separate page spreads. An example is Firefly. It is made up of 4 pages, which is considered 2 separate page spreads. This reward is for 3 of these side by side layouts.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    8 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  8. Select this reward

    Pledge $170 or more About $170

    A copy of each Volume, 1-4

    -One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 1)’ (2nd Printing)

    -One copy ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 2)’

    -One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 3)’

    -One copy of ‘3.75 Inch Joe: The Special Forces Team that forged an American Hero (Volume 4)’

    These books in the series are each 80 page, 9”X10” library of designs and stories ranging from 1982-1994, including some unproduced concepts!

    This fully colored book will be printed on 100# paper in a Soft Perfect Bind format.

    Less
    Estimated delivery
    Ships to Anywhere in the world
    20 backers
    $
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (21 days)