This project will only be funded if it reaches its goal by Fri, September 7 2018 12:26 PM UTC +00:00.
PiShell: A unique 3-in-1 case for Raspberry Pi and Camera
The story for the development for the case goes back to January 2018 where we were browsing for various cases for the Raspberry Pi. We went through many open and closed cases and even camera cases and felt something was lacking. The closed case didn’t give any access to GPIO pins or camera mounting. Open cases have no protection for camera and camera cases again denied us access. So, we thought, why not incorporate all of the good features of all these cases to make a unique and remarkable case. And we did! Now, we need your help.
What is PiShell?
- PiShell is a unique case made out of three parts; The base-bumper, body-cover, camera-cover.
- The material is made out of ABS plastic with dual-shot injection molding.
- When fully assembled, PiShell gives full protection from the elements as well as give an attractive look to your Raspberry Pi setup.
- Easily access the GPIO pins by sliding the top cover, mount the camera in the designated slot and close the top cover again, securing the setup.
- It also has 3 vents that double as the heatsink so you don’t have to worry when you’re overclocking your unit. PiShell got you covered.
How to assemble PiShell?
Why do you need PiShell?
PiShell is here to turn gazes! With a wide variety of color combination available, there’s a PiShell for everyone. You can even mix and match different colors to make a unique case for yourself! Just open up the cover with easy to use plug and play and assemble it back with different colored parts. Its as easy as 1 2 3! The money raised from here will be used in material and mass production cost. We’ve been making cases before so you can rest easy knowing that there won’t be any delay or disappointment when you get your perk-reward. So back us now and help us turn it into a reality!
How compatible is PiShell with Raspberry Pi models?
PiShell is designed in such a way that it incorporates every Raspberry Pi model and allow the user to use the device without any worries. The icing on the top is the shielded camera case which again makes it stand out from the crowd.
The way it goes..!
Thanks a ton for reading the campaign. Your interest in our product is highly appreciated. This gives us the energy to grow better with our every product and campaign.
Risks and challenges
Although being the largest manufacturer and seller of the Raspberry Pi cases, the main risk in this project is that this case fulfills all the desired needs of a user using the Raspberry Pi. Our aim is to provide the consumers the best of the products we manufacture. Our team constantly works up on the latest technological challenges to make sure that we always stay updated with the technology and engineering.
Fortunately, we have been trying through many prototypes over the last 6 months and were able to finalize a classic design for you. We have been able to make the final products without any roadblocks at all and our methods for producing the cases are consistent and solid. The only concern we have is if we get more orders that we can produce in a timely manner.