Share this project

Done

Share this project

Done
The expansion sets contain a bridge and a sacrificial set, printable STL files for your 3D printer. Use on their own or with the tower.
The expansion sets contain a bridge and a sacrificial set, printable STL files for your 3D printer. Use on their own or with the tower.
159 backers pledged NZ$ 2,905 to help bring this project to life.

About

The Wizard's Tower - Expansion Sets - Printable STL files

NZ$ 2,905

159

The Wizard's Tower - Expansion Sets contains modular bridge pieces to print your own bridge on your home 3D printer (or by using a printing service). As an extra expansion to this you can also pledge for the sacrificial set if you like your wizards a bit more evil.

The bridge pieces were designed to be used in conjunction with The Wizard's Tower to create a grand entrance or join two towers together. But they can be used completely separately to build a bridge crossing a river or even a tall viaduct joining 2 cliff faces. 

The ruins included in the pledge make it great for creating scenic pieces on your battlefield. Perhaps a long, destroyed bridge spanning the length of your table.

The Bridge Extras adds even more dimensions to your tower allowing you to connect multiple towers through the junctions or even join together different tiers of your tower. 

The sacrificial set is great for a lovely outdoor setting for your evil wizard, complete with its own pillar for captives to be tied to, sacrifical altar, floating font pouring out some gooey yuckness and a portal to some place of evil (or good, maybe some lovely fairy land).

If you missed out on the original Wizard's Tower Kickstarter you can pledge here for the entire set of the Tower and the bridge or if you are a returning backer (or just want the bridge) you can pledge solely for the bridge. As simple as that.

FILES WILL BE SENT OUT VIA DRIVETHRURPG. PLEASE ENSURE YOU HAVE A FREE ACCOUNT SET UP WITH THEM TO RECEIVE YOUR REWARDS.

Pledging for the Bridge will get you these STL files, delivered to your DriveThruRPG account shortly after completion of the project.

  • Walkway
  • Height Extender
  • Base
  • Ramp
  • Base Ruin
  • Height Ruin
  • Walkway Ruin
  • Walkway Ruin 2

That is 8 files for a mere $4NZD! (roughly $2.60 USD or £2) Insane value!

Do you want some extras? The Bridge Extras give you even more variety for the Bridge.

  • Two Tiered walkway
  • 4 Way Junction
  • T Junction
  • Toll Booth/Guard House

These 4 extras can also be yours for $4 extra ($8 The Big Bridge pledge or higher).

Or you can choose the Sacrificial Set STL files, which includes:

  • The Sacrificial Circle
  • Sacrificial Circle with candles
  • Altar (5 pieces)
  • Captive Pillar
  • Open Portal insert
  • Closed Portal insert
  • Stone insert
  • Floating Font insert
  • Font

9 sculpts files for $4.

 The Walls are an optional add on for your pledge.

To do this, click the blue "Manage Your Pledge" button at the top of the screen. Then click the blue "Change your Pledge" button down near the bottom of the screen and increase the amount by $4. 

Alternatively, if you only want The Walls and nothing else then you can select that pledge level to your right.

 Some of these files are rather large files.

The 4 way junction, the largest piece, can fit into a space 145.5mm x 145.5mm x 79mm or when using the cut version 80mm x 80mm x 79mm

The two tiered bridge is 50mm x 160mm x 132mm high or two pieces 50mm x 105mm x 88mm for the taller of the two and the wider being 50mm x 97mm x98mm

The walkway is 50mm x79mm x158mm. I have yet to chop this one into smaller pieces but I imagine it in two pieces would have no dimension greater than 100mm.

The Sacrificial Set has the tallest piece (The portals) measuring 79mm tall. The surrounding circle measures 100mm in diameter. The stone insert measures 58mm in diameter.

 This time there are a few different reward levels

 Keep up to date with the campaign. (Or just give me enough money to buy a frozen coke)

 Pledge at this level and you will receive, via DriveThruRPG, 7 bridge files so that you can either create a bridge by itself or, even better, add it to your Wizard's Tower and make it even better! (Around US$2.65 or £2)

This pledge level gives you the Sacrificial Set. 8 further files to continue your magical enterprises. 

 This gives you all the 7 files of The Bridge, plus 3 extra files giving you even more possibilities for your Wizard's Tower. That's 10 files!

 Get The Bridge and the Bridge Extras along with the Sacrificial Set. Enough printing to keep you going for... well a long time. A total of 18 files!

 This is for those people that missed out on the first Kickstarter campaign. You will receive 10 files from the original campaign plus the 7 Bridge files, 3 Bridge Extra files and the 9 Sacrificial Set files. A total of 28 files!  

The walkway ruin is unlocked for all people receiving The Bridge files (which includes, The Bridge, The Big Bridge, I Want It All! and I Want It All But I'm New Here! pledges). 

The Sacrificial set has gained a piece that allows it to sit atop the tower top. All inserts will fit into this tower topper. It would look great atop the bridge section so that the bridge can lead to this section. This would expand the total different tower tops available to 4 (Conical Roof, Arcane Summit, Ruin and Sacrificial Circle)

 The toll booth will has been unlocked. This is a standalone piece to sit beside the bridge beginning. It could be used as a toll booth or as a small guard house for the Tower. Check this update for printed pictures.

 If we reach $2000 The Walls will become available as an optional Add On. This will consist of 20+ files for a wall to go around your Wizard's Tower. A price has not been set for this yet but will be shown if we reach $2000. Wall sections will insert into each other at a variety of angles. Each wall part is identical to the others but there will be 4 different pillars to make them look different. each of these different pillars will have 5 directions in which additional walls can be slotted. Straight 90 degrees left and right, 45 to the left and right. It will also include an ending pillar and an archway (which could be a great place to put the Tollbooth/Guardhouse).

Click here to see some printed versions.

If we reach this it will not be sent out until 2 weeks after the first rewards have been sent.

 At $2500 The Wall Ruins have been added to all those that have pledged for the Wall. These fit together in a similar way to the Walls.

A freebie for everyone
A freebie for everyone

 This last one is just a little freebie for anyone pledging, from $1 through to $1,000,000. A small entrance way for The Wizard's Tower. Check out update 9 for more information.

Test prints of the files. I usually like to test print in grey but I ran out of this and had to use silver, which I then also ran out of and had to use red.

I really do recommend using supports with these prints as they have many overhanging pieces. Especially the bridges.

So before my kids managed to wrangle these off me, I managed to take a few snaps of them. Sorry. I'm no photographer but this is mainly to give the idea that they can be printed. The larger files have also been split into smaller pieces (Only the T junction and walkway are left to do of these) so if you have a smaller print area you should still be able to use them.

The Wizard's Tower with the bridge sections and the two tiered section.
The Wizard's Tower with the bridge sections and the two tiered section.
The ramp with a ruined bridge section.
The ramp with a ruined bridge section.
Most of the piece of the sacrifical set (just missing the blank stone insert)
Most of the piece of the sacrifical set (just missing the blank stone insert)
4 Way Junction - Printed in red... obviously
4 Way Junction - Printed in red... obviously

 Fulfillment of The Wizard's Tower - Expansion Sets will be completed through DriveThruRPG. Each backer will receive copies via their account. Fulfillment will begin as soon as possible. This should hopefully be within 2 weeks of the project funding. A survey will be sent out shortly after the project has funded to gather email addresses associated with DriveThruRPG accounts. Please note, this is the only way to gain these files. It will be advantageous to you as you will then have the files in your library so you can access them as often as you would like.

  If you don't yet have an account Click Here to make one.

Risks and challenges

This is my second Campaign for STL files. The first one went smoothly in regards to fulfilling rewards. I learnt a couple of things to make it go even smoother but all rewards were ready to be sent out on the due date with many people receiving them within days of the close of the campaign.
Files are constantly backed up in the cloud so that they are kept safe in the unlikely event of my computer crashing big time.

Learn about accountability on Kickstarter

Questions about this project? Check out the FAQ

Support

  1. Select this reward

    Pledge NZ$ 1 or more About $0.69

    Just Browsing

    Pledge here to keep up to date with the project and just be a really nice person.

    Less
    Estimated delivery
    1 backer
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  2. Select this reward

    Pledge NZ$ 4 or more About $3

    The Bridge

    Receive The Bridge STL files plus all applicable stretch goals

    Includes:
    • The Bridge STL files
    Less
    Estimated delivery
    1 backer
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  3. Select this reward

    Pledge NZ$ 4 or more About $3

    Sacrificial Set

    All of the STL files for the Sacrificial Set and any applicable stretch goals.

    Includes:
    • Sacrificial Set
    Less
    Estimated delivery
    0 backers
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  4. Select this reward

    Pledge NZ$ 4 or more About $3

    The Walls

    Receive The Walls STL files only.

    Includes:
    • The Walls STL files
    Less
    Estimated delivery
    0 backers
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  5. Select this reward

    Pledge NZ$ 8 or more About $6

    The Big Bridge

    The Bridge and the Bridge Extras. Plus any applicable stretch goals.

    Includes:
    • The Bridge STL files
    • Bridge Extras
    Less
    Estimated delivery
    3 backers
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  6. Select this reward

    Pledge NZ$ 12 or more About $8

    I want it all!

    Get the Bridge, Bridge extras and the Sacrifical Set plus any applicable stretch goals.

    Includes:
    • The Bridge STL files
    • Bridge Extras
    • Sacrificial Set
    Less
    Estimated delivery
    101 backers
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.
  7. Select this reward

    Pledge NZ$ 25 or more About $17

    I want it all but I'm new here!

    Get the Bridge, Bridge extras, the Sacrificial Set and the original Wizard's Tower set. Perfect for first time backers.

    Includes:
    • Bridge Extras
    • Sacrificial Set
    • The Bridge STL files
    • The Wizard's Tower STL files.
    Less
    Estimated delivery
    52 backers
    NZ$
    Kickstarter is not a store.

    It's a way to bring creative projects to life.

    Learn more about accountability.

Funding period

- (14 days)