Share this project

Done

Share this project

Done
The most affordable smart multi-color 3D Printer, designed for everyone, everyday use.
The most affordable smart multi-color 3D Printer, designed for everyone, everyday use.
832 backers pledged £254,825 to help bring this project to life.

Laser & WiFi Modules

Posted by DreamMaker (Creator)
3 likes

Dear Backers,

It has been a long time since our last update! We really miss you so much! Recently we got a lot of emails asking about the laser module and WiFi module. Today I would like to take this chance to share with you some latest progress of these two modules.

Laser Module:

It was said in our previous updates that we would send out the laser package in September. (explained in the £300,000: A laser engraving module plus protection glasses https://www.kickstarter.com/projects/1122205541/overlord-3d-printer-multi-color-smart-stylish/posts/1092679) But as some delay occurs to the whole program, this is very challenging. But don't be upset, we're trying our best to make it happen.

After a lot of testing, we have decided which laser model we will use. The hardware and software prototype of the laser module are ready. The software is a little primeval and only support some basic function of laser engraving. But we will make it better in the following weeks. We are now testing the laser module in OverLord. If we are lucky enough and the test goes without serious drawback, we could start the purchase soon and you could see this little laser module on production line. 

A glance of the software for laser engraving:

 WiFi module:

We have just finished the 2nd version of mother board prototype last week. There were some little flaws in the previous version. But these flaws could be prevented this time. The software and APP (for iOS) are all ready to be tested with the new mother board. The app has been uploaded to apple app store. We are waiting for the result of official approval. 

A glance of the user interface for WiFi printing app:

Dear backers, if there is anything you want to know or share with us, welcome to contact Amy at store@dreammaker.cc. Technical questions please go to support@dreammaker.cc, Larry will be there to help you. Sometimes the emails flood out of the mailbox, if we could not reply you in time, please forgive us and we recommend you email us again so that your email would appear on the top of the email box.  If you want to own a 3D printer but missed our kickstarter campaign, you could find OverLord here: http://www.dfrobot.com/index.php?route=product/category&path=137_170

Wish all of you good luck!

Best wishes,

Your DreamMaker Team

Tobias, Andreas, and 1 more person like this update.

Comments

Only backers can post comments. Log In
    1. Roger Garner on

      Thanks for the update guys, still loving my Overlord Pro after several months :) Looking forward to the laser upgrade!