Funding Unsuccessful This project’s funding goal was not reached on .

Update #5

Increasing slowly

Comment

Hello everyone!  Thanks for all of the interest & support!  Just a quick note . . . funding is increasing still, although a littly slowly.  I'm sending out emails and posting on forums whenever I can find the time.  Keep spreading the word!

-Cheers!

Calvino

Early a/c axis sketch:

  • Image-34224-full
66
Backers
$2,072
pledged of $16,500 goal
0
seconds to go
  • Pledge $1 or more
    You selected

    60 backers

    Once the funding goal is reached, it should take approximately four weeks to assemble all of the documents into a set of plans/instructions that will include 3D CAD models, some 2D CAD drawings and cut files, hyperlinks to suppliers, parts lists, and concept explanations. This set of documents will be available for download from www.calvinodesign.com. Thank you for your interest. Cheers!

  • Pledge $700 or more
    You selected

    1 backer

    All of the download-able open source plan/instruction documents, PLUS your choice of: a 14ga. gantry shear plate with custom logo designed & plasma cut into it, OR one X motor bracket & pressure spring with timing gears, a belt, & the pinion gear, motor not included but bracket has holes for NEMA 23 & 34. Includes shipping to the contiguous 48 states, shipping outside of the contiguous 48 states will be additional cost to the backer. http://www.calvinodesign.com/90037/90037-02.03-5axisCncPlans/

  • Pledge $1,200 or more
    You selected

    0 backers

    Same as above, PLUS an additional X motor bracket as described above (motor not included). Includes shipping to the contiguous 48 states, shipping outside of the contiguous 48 states will be additional cost to the backer. http://www.calvinodesign.com/90037/90037-02.03-5axisCncPlans/

  • Pledge $1,500 or more
    You selected

    0 backers

    Same as above, PLUS the Y motor bracket as described above (motor not included). Includes shipping to the contiguous 48 states, shipping outside of the contiguous 48 states will be additional cost to the backer. http://www.calvinodesign.com/90037/90037-02.03-5axisCncPlans/

  • Pledge $2,000 or more
    You selected

    0 backers

    All of the download-able open source plan/instruction documents, PLUS a 14ga. gantry shear plate with custom logo designed & plasma cut into it, PLUS THREE (two X + one Y) motor brackets & pressure springs with timing gears, belts, & the pinion gears, motors not included but the brackets have holes for NEMA 23 & 34. Includes shipping to the contiguous 48 states, shipping outside of the contiguous 48 states will be additional cost to the backer. http://www.calvinodesign.com/90037/90037-02.03-5axisCncPlans/

  • Pledge $5,500 or more
    You selected

    0 backers

    All of the download-able open source plan/instruction documents. PLUS, THE BIG ISSUE: you get the complete A/C axis head with gears, belts & mount holes for your selection of spindle/router. Spindle/router and stepper motors not included. (Backer to supply make & model with dimensions & configuration of mounting & holes for spindle/router). A/C head is designed to be welded to a Z carriage fabricated per the open source documents. (welding or drilling & bracket fabrication required to attach it to your Z carriage). This A/C head design is intended for machining tolerances for construction industry and should be assumed to be +/- 0.125". Shipping to contiguous 48 states included, shipping outside of contiguous United States will be additional cost to the backer. http://www.calvinodesign.com/90037/90037-02.03-5axisCncPlans/

  • Pledge $7,500 or more
    You selected

    0 backers

    All of the download-able open source plan/instruction documents, PLUS a 14ga. gantry shear plate with custom logo designed & plasma cut into it, PLUS THREE (two X + one Y) motor brackets & pressure springs with timing gears, belts, & the pinion gears, motors not included but the brackets have holes for NEMA 23 & 34. PLUS THE BIG ISSUE: you get the complete A/C axis head with gears & belts with mount holes for your selection of spindle/router. Spindle/router and stepper motors not included. (Backer to supply make & model with dimensions & configuration of mounting holes for spindle/router). This A/C head design is intended for machining tolerances for construction industry and should be assumed to be +/- 0.125". Shipping to contiguous 48 states included, shipping outside of contiguous United States will be additional cost to the backer. http://www.calvinodesign.com/90037/90037-02.03-5axisCncPlans/

Funding period

- (40 days)