Kickstarter

THE FIRST BACKER TO SUBMIT $1.00 WILL GET THEIR DOLLAR BILL HUNG ON MY WALL !!! (write your name on it first:-)

Every Dollar Helps! You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the TROBOT web site.

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a collectable laser engraved ‘TROBOT Supporter’ acrylic emblem.

The FIRST FIVE Backers to give $15 will receive a PERSONALIZED TROBOT insignia nameplate engraved in clear acrylic. LIMITED REWARD! Please submit the exact spelling of what you want engraved.

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a personalized TROBOT insignia nameplate engraved in clear acrylic. Please submit the exact spelling of what you want engraved.

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a complete acrylic TROBOT axis 5 knuckle assembly (aka miniature pan & tilt mechanism) including 2 servos. This is the same mechanism used in this project: http://youtu.be/riiqyXnckR4 (see link below)

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a complete acrylic TROBOT axis 5 knuckle assembly (aka miniature pan & tilt mechanism) including 2 servos. This is the same mechanism used in this project: http://youtu.be/riiqyXnckR4 (see link below). U.S. Shipping Included, International Shipping Please add $6.00

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a full TROBOT 3.0 laser cut sheet of plastic (for the true do-it-yourselfer). We’ll load up a sheet of plastic and let the laser do its work, then we send you the parts, you clean em’, glue’em, assemble them, and then add your own hardware & servos and build your own TROBOT.

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS site, plus you’ll receive a set of cleaned and glued laser cut (partially assembled) parts, & key hardware. You supply your own servos and assemble from there.

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a TROBOT 3.0 kit. Including servos, hardware, and assembly documentation. You just put the parts together and have your very own TROBOT 3.0..

THE FIRST 3 BACKERS TO GIVE $250 WILL RECEIVE THE TROBOT 4.0 KIT (as described below - servos NOT included)

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive one of the first TROBOT 4.0 kits (as soon as they become available). It will include all of the laser cut parts (cleaned, glued, and ready for assembly), hardware (bearings, screws, etc), everything EXCEPT the Servo actuators – Target/Estimated costs for the advanced servos will be about $300-$500 depending on the final design.

You'll be listed as an ‘Initial TROBOT Supporter’ on documentation and the web site, PLUS you’ll receive a FULL TROBOT 4.0 kit (as soon as it becomes available) – including all hardware and servos -- whatever they end up being!!!