80MPH Extreme DigiPlate Clamp Test
This test was probably was more for fun and geekdom than necessity but we did it anyway. We did the shake test yesterday and you saw that the clamps really aren't going to let go of your laptop. Today we mounted the DigiPlate to the roof of a car and cruised up the 110 in LA and did the extreme DigiPlate clamp test. Check out how robust the laptop clamps are:
75
Backers
$23,527
pledged of $20,000 goal
0
seconds to go
Funding period
May 7, 2012 -
Jun 21, 2012
(45 days)
- First created · 9 backed
- Dana Neibert 373 friends
- Website: dananeibert.com
Pledge $5 or more
3 backers
Every dollar counts! Your Abe Lincoln will help make this project a reality and bring joy to many, many laptops which will ride out their golden years without the fear of sliding off a chair or table or being stepped on.
Estimated delivery: Aug 2012Pledge $25 or more
6 backers
With a $25 pledge, you will receive an 8x10 print of your choice from Dana Neibert (DigiPlate’s creator/the goofy guy in the video). All prints are personally printed, inspected and signed by Dana. Prints are archival Ultrachrome prints on fine art heavy weight paper. This includes domestic shipping in the USA. International shipping will be extra based on location. A selection of available prints can be viewed at dananeibert.com/shop
Estimated delivery: Aug 2012Pledge $165 or more
25 backers All gone!
Early Bird Special! With a $165 pledge, you will receive a DigiPlate system that includes the DigiPlate, base and laptop clamps. Retail on this package will be $279. This includes domestic shipping in the USA. International shipping will be extra based on location.
Estimated delivery: Aug 2012Pledge $225 or more
9 backers
With a $225 pledge, you will receive a DigiPlate system that includes the DigiPlate, tripod bracket mount and laptop clamps. Retail on this package will be $279. This includes domestic shipping in the USA. International shipping will be extra based on location.
Estimated delivery: Aug 2012Pledge $225 or more
17 backers All gone!
With a $225 pledge, you will receive a DigiPlate system that includes the DigiPlate, base and laptop clamps. Retail on this package will be $279. This includes domestic shipping in the USA. International shipping will be extra based on location.
Estimated delivery: Aug 2012Pledge $225 or more
3 backers
With a $225 pledge, you will receive a DigiPlate system that includes the DigiPlate, baby pin mount and laptop clamps. Retail on this package will be $279. This includes domestic shipping in the USA. International shipping will be extra based on location.
Estimated delivery: Aug 2012Pledge $250 or more
4 backers
With a $250 pledge, you will receive a 16x20 print of your choice from Dana Neibert (DigiPlate’s creator/the goofy guy in the video). All prints are personally printed, inspected and signed by Dana. Prints are archival Ultrachrome prints on fine art heavy weight paper. This includes domestic shipping in the USA. International shipping will be extra based on location. A selection of available prints can be viewed at dananeibert.com/shop
Estimated delivery: Aug 2012Pledge $1,950 or more
1 backer
With a $1950 pledge, you will receive a retail starter pack (10 complete DigiPlate systems—Digiplate, mount, laptop clamps). Retail value on this pledge will be $2790. This includes domestic shipping in the USA. International shipping will be extra based on location.
Estimated delivery: Aug 2012Pledge $9,250 or more
1 backer
With a $9250 pledge, you will receive the Big Boy retail pack (50 complete DigiPlate systems—Digiplate, mount, laptop clamps). Retail value on this pledge will be $13,950. This includes domestic shipping in the USA. International shipping will be extra based on location.
Estimated delivery: Aug 2012
Comments
Creator Nine Volt on May 12, 2012
Ha! That's funny. I didn't even notice that. I think because we shot the video with the iPhone and it was super shaky, YouTube asked if we wanted to stabilize it. It must be some byproduct of the stabilization. Be rest assured, the DigiPlate will be made from 6061 aluminum and not jello!
Creator Charles Magnuson on May 11, 2012
Looks solid!
How come it looks like the video was shot through a plate of Jello? The picture wiggles and morphs. I thought I was tripping out at first.