The first adjustable NanoSuction stand for the iPad & iPhone that works with any device, anywhere. Now available on GekkoStand.com!
Miss the project deadline? No Problem... AVAILABLE FOR PURCHASE ON GekkoStand.com!
This project started about 18 months ago after realizing that most device stands and mounts are one-trick acts; they have only one use and work with only one device. So, the Gekko Stand's initial purpose was to support multiple devices without having to switch out a case or bolt on an accessory in order to do so.
The first solid prototype was made out of a gooseneck hose with a neodymium magnet on one end and a clamp on the other. It worked, but we knew we weren't even close to where we wanted to be. The stand still had many limitations and we were determined to improve.
After receiving feedback and a lot of brainstorming, our focus shifted towards improving the arm. A gooseneck hose or soft flexible pipe wasn't going to cut it. Sure, it held devices, but we wanted something that you could bend, wrap, coil, straighten, and make any size you want. Our solution became the ball-and-socket-joint arm.
Finally, we had a big problem that needed to be addressed: people generally aren't comfortable putting magnets around their electronics. So, we explored a few different options and discovered that cutting-edge NanoSuction technology was the answer we were looking for. Not only is it stronger than the neodymium, but it also can work with more devices, as well as on the opposing end of the arm. After experimenting with different materials and assembly structures, we soon reached a perfect balance of strength, size, and structure. We now have an extremely solid, versatile, and elegant product that we are proud of, and we can't wait for you to get one too!
PLEDGE REWARD COLOR CHOICES:
***NanoSuction pads will come in your choice of Black or White***
See many more product demos and video blogs on GekkoStand.com!
T-Shirt Reward Concept:
We have several functional prototypes made from hand molds, 3D printing, stereolithography and laser sintering, but in order to do our first production run we have to use injection molding. The Gekko Stand requires molds that make three different parts: one part is the ball and socket joint, the second part is the ball-end pad backing, and the third is the socket-end pad backing. In order to do injection molding we need to get the tooling done on two mold bases. Luckily, we've already purchased the bases and all we need to do is pay for the tooling. So, we figured Kickstarter would be the perfect place to have this Jerry Maguire moment, "Help me, help you, help me!" We know you're going to love the Gekko Stand and we've already loved the process of developing it so far... Now all we need is you!
Risks and challenges Learn about accountability on Kickstarter
We have done our best to prepare for the inherent risks that are associated with the design and manufacturing process that we could encounter during the project's course. There are a few potential risks, but we're more than qualified to overcome them successfully if they appear.
As with any Kickstarter design project, time is of the essence. It is frustrating to the backers of a project if their product doesn't get delivered within the estimated timeframe. Although we have everything from manufacturing, packaging, distribution and all of our downstream operations lined up and ready to go, our pledge to you is to keep the communication line open. If for any reason we experience delays during the project, you will hear about it promptly on our Kickstarter updates, as well as on GekkoStand.com. We will also be sharing general info along the way, and milestones that we reach during the process.
The Gekko Stand has very tight tolerances between the ball and socket joints. This is the key to the articulating arm, and if the tolerance is too tight or not tight enough, the stand would not be functional. We have several prototypes that have been molded, laser sintered, and 3D printed. All of them work and we have reached the perfect tolerance level to balance maximum stability with ease of adjustment. Our final 3D CAD files have gone through digital feasibility studies, nylon laser sintering, and all we need to do is pay for the tooling on the mold bases so we can start our first commercial production run.
Suppliers can be an issue during the manufacturing process, but we have all of the supplies we need onsite at our production facility in Reno. The lead tool designer has over 30 years of experience and the facility we have agreed to do business with has been operating in Reno since 1977. They have a full turn-key operation and the ability to produce 8,000,000 units/year with just one production mold for the Gekko Stand.
ABOVE ALL ELSE, we will keep you updated during and after the Kickstarter campaign. Frequent updates and video blogs are on and will continue to be on GekkoStand.com. The creator of the Gekko Stand, Dwight Houser, has a Bachelor's Degree in Business Management from MSU with a focus on Operations. He has successfully completed many projects with time constraints and we can't foresee any risks or challenges that would negatively affect the outcome of this project. Thank you!
The NanoSuction pads stick firmly and adhere to any flat surface. So, the short answer is yes. We have tested the Gekko Stand with the iPad, iPad Mini, Kindle Fire, Samsung Galaxy, Zeepad, Coby Kryos, and a few other tablets. It also works very well with all of the market leading smart phones, including the iPhone 4/4S, iPhone 5, Samsung Galaxy, HTC One, Nokia Lumia, and some BlackBerries. If you don't know if your phone will work, just send a message to email@example.com and we'll gladly let you know either way!
We have had the NanoSuction technology in our hands for over a year and it's still holding up well. The Gekko Stand will come with dust covers to protect the pads, and they are very easy to clean if they get dirty and lose some suction power. If your pads do get destroyed somehow, we will have them for sale onGekkoStand.com at a very inexpensive price.
There are two really good ways to clean the pads. If you have about 20 minutes to let them dry, the best way is to just run them under the sink for a few seconds while rubbing the face of the pad with your finger. The other great way to clean the pads is with tape. You simply clean the pad face the same way you would get pet hair off of your clothes.
The ball and socket joints could seem difficult to separate at first, but once you get it, it's easy. The best way to get them apart is to literally fold the arm as if you're trying to fold it in half, with your hands splitting the point at which you wish to separate the joints. Putting them back together, or attaching the clamp or suction cup is easy as well. You simply put the bottom part of the smaller ball into the bottom part of the larger socket and push together from the bottom up.
It truly depends on the case. The NanoSuction sticks best to flat surfaces, and the more glossy they are, the better. That being said, there are many cases that have surprised us, and the pads even stick really well to wood furniture and some types of leather. BUT, what we and others have found is that the BENEFITS of using the Gekko Stand far outweigh the cost of having to remove or replace your "blinged out" case.
pledged of $20,000 goal
seconds to go
Feb 10, 2013 - Mar 15, 2013
Pledge $5 or more
THANK YOU - You will be personally thanked on GekkoStand.com and a URL of your choice will be added to our website. ALL REWARDS INCLUDE REWARD #1!Estimated delivery: Mar 2013
Pledge $25 or more
EXCLUSIVE Gekko Stand Kickstarter T-Shirt! Check it out in the details to the left. If you want a T-Shirt added to another reward level, just add $25 to your original pledge.Estimated delivery: Jun 2013Add $25 to ship outside the US
Pledge $30 or more
200 backers All gone!
SIMPLE - **EARLY BIRDS** - Be the first to receive 1 Gekko Stand in the color of your choice with 12 ball and socket joints (12 inches) and 2 NanoSuction pads.Estimated delivery: Jun 2013Add $20 to ship outside the US
Pledge $35 or more
SIMPLE - Receive 1 Gekko Stand in the color of your choice with 12 ball and socket joints (12 inches) and 2 NanoSuction pads.Estimated delivery: Jul 2013Add $20 to ship outside the US
Pledge $44 or more
109 backers Limited (141 of 250 left)
PRO PACKAGE - **last run** Receive 1 extra long Gekko Stand in the color of your choice with 24 ball and socket joints (24 inches) and 2 NanoSuction pads, PLUS an attachable clamp and an attachable suction cup for applications on non-flat surfaces.Estimated delivery: Aug 2013Add $25 to ship outside the US
Pledge $45 or more
100 backers All gone!
PRO - **EARLY BIRDS** - Receive 1 extra long Gekko Stand in the color of your choice with 24 ball and socket joints (24 inches) and 2 NanoSuction pads, PLUS an attachable clamp and an attachable suction cup for applications on non-flat surfaces.Estimated delivery: Jun 2013Add $25 to ship outside the US
Pledge $45 or more
125 backers All gone!
PRO - **LATE JULY** - Due to popular demand, Receive 1 extra long Gekko Stand in the color of your choice with 24 ball and socket joints (24 inches) and 2 NanoSuction pads, PLUS an attachable clamp and an attachable suction cup for applications on non-flat surfaces.Estimated delivery: Jul 2013Add $25 to ship outside the US
Pledge $50 or more
PRO - Receive 1 extra long Gekko Stand in the color of your choice with 24 ball and socket joints (24 inches) and 2 NanoSuction pads, PLUS an attachable clamp and an attachable suction cup for applications on non-flat surfaces.Estimated delivery: Jul 2013Add $25 to ship outside the US
Pledge $75 or more
T-SHIRT + PRO - Receive a signature Gekko Stand "G" logo T-Shirt in your size PLUS 1 extra long Gekko Stand in the color of your choice with 24 ball and socket joints (24 inches) and 2 NanoSuction pads, PLUS an attachable clamp and an attachable suction cup for applications on non-flat surfaces.Estimated delivery: Jul 2013Add $25 to ship outside the US
Pledge $99 or more
MEGA PRO - Receive a MEGA Gekko Stand in the color of your choice with 36 ball and socket joints (3 feet), 4 NanoSuction pads, 2 attachable clamp mounts, and 2 attachable suction cups!Estimated delivery: Jun 2013Add $25 to ship outside the US
Pledge $4,999 or more
0 backers Limited (2 of 2 left)
SPONSOR - Receive a paid trip to pick up your custom Gekko Stand at our production facility in Reno, Nevada! You'll go on a tour and learn about the plastic injection molding process alongside our lead tool designer. We'll also take you to a 5 Star dinner overlooking Lake Tahoe and you'll get a premium advertising space on GekkoStand.com! *Continental US Backers Only*Estimated delivery: Jun 2013