359
Backers
$69,882
pledged of $15,000 goal
0
seconds to go
Funding Successful
This project successfully raised its funding goal on January 10, 2011.
Pledge $5 or more Pledge $5 or more
Thank you! We'll mail you a thank you note with a small commemorative plaque engraved on the Mother CNC machine and list you on our website as a valued founding sponsor
Pledge $12 or more Pledge $12 or more
You will receive a PDF of the complete plans, our comprehensive construction manual, access to our tech support website and forum, and we'll list you on our website as a valued founding sponsor
Pledge $35 or more Pledge $35 or more
Complete plans, comprehensive builder's manual, tech support website access and 3 of our bare driver board PCBs with component list and assembly instructions, ready for you to populate and build, and we'll list you on our website as a valued founding sponsor
Pledge $65 or more Pledge $65 or more
Complete plans, comprehensive builder's manual, tech support website access, 3 of our driver board kits, a spindle control kit with wiring diagram and assembly instructions, ready for you to start building your own CNC machine, and we'll list you on our website as a valued founding sponsor (international sponsors note: freight outside of the US will be extra, but charged at our cost)
Pledge $120 or more Pledge $120 or more
Complete plans, comprehensive builder's manual, direct e-mail tech support access, 3 of our assembeled driver boards, a spindle control board, a complete set of rails and bearings with assembly instructions, ready for you to build your own CNC machine, and we'll list you on our website as a valued founding sponsor (international sponsors note: freight outside of the US will be extra, but charged at our cost)
Pledge $200 or more Pledge $200 or more
Complete plans, comprehensive builder's manual, Priority VIP tech support access, 3 of our assembeled driver boards, 3 stepper motors with threaded rods, couplings and nuts, a spindle control board, a complete set of rails and bearings, all with assembly instructions ready for you to build your own CNC machine, a very cool commemorative MyDIYCNC t-shirt, and we'll list you on our website as a valued founding sponsor (international sponsors note: freight outside of the US will be extra, but charged at our cost)
Pledge $390 or more Pledge $390 or more
You will get a complete DIY Desktop CNC Machine kit including 110V spindle and controller, Priority VIP tech support access, a very cool commemorative MyDIYCNC t-shirt, and we'll list you on our website as a valued founding sponsor (international sponsors note: freight outside of the US will be extra, but charged at our cost)
Pledge $520 or more Pledge $520 or more
The Turnkey Reward: A complete assembled DIY Desktop CNC Machine and User Manual with a starter disk of applications and installation guidance for creating CAD models and outputting them to CAM software to control your CNC machine, for either Windows or Linux systems. You'll also receive a very cool commemorative MyDIYCNC t-shirt, and we'll list you on our website as a valued founding sponsor (international sponsors note: freight outside of the US will be extra, but charged at our cost)
Pledge $2,500 or more Pledge $2,500 or more
The VIP Extra Deluxe Treatment: A complete, operational DIY Desktop CNC Machine and new laptop, pre-configured and tested, running a full version of KCam CAM software, delivered and setup at the location of your choice within the continental 48 US states. Includes personal training and instruction. I'll personally deliver our very cool commemorative MyDIYCNC t-shirt, and we'll list you on our website as a premium founding sponsor. This reward is not available for delivery outside of the continental US.
Project By
Has not connected their Facebook account.
Stephen McGloughlin is a technology consultant in the Sacramento region of Northern California and a Dean of Technology at a local college. His background is in engineering, electronics and software and includes Intel, Microsoft, NEC, HP, Sandia National Labs and Olympus among his many clients. He is a published technology author for Prentice Hall and QUE, and holds a software patent with University of California Davis.
