We've launched an exciting new project of our own! Introducing the Kickstarter app for iPhone!
Photo-main

With a Hi-Tec-C pen on one end and a stylus tip on the other, the VR1 is the ultimate instrument for writing and touchscreen needs.

Background:

The VR1 Pen + Stylus is the ultimate union for your Hi-Tec-C pen refill and your touchscreen devices. At 20g, the T-6061 grade aluminum VR1 sits in your hand comfortably. The pen and stylus tip are each protected by screw-on caps when not in use. Diametrically magnetized Neodymium magnets are attached at the end of each cap allowing cap to cap attachment or any magnetic surface, eliminating the chance of misplacing caps during use.

Development:

The VR1 Pen + Stylus went through several iterations before the design was finalized.The following features of the VR1 that were enhanced prior to locking down the design:

  • Attachment methods of the caps to the main housing body
  • The outer diameter of the main body housing from 8mm - 10mm
  • The durometer and diameter of the conductive stylus tip from 5mm - 8mm
VR1 3D Rapid Prototypes
VR1 3D Rapid Prototypes
Final Design of the VR1 Pen + Stylus with Magnetic Caps
Final Design of the VR1 Pen + Stylus with Magnetic Caps

Specifications:

  • Available finishes: raw aluminum, anodized black, silver, blue, red, and Kickstarter green. 
  • T-6061 grade aluminum housing
  • Outer Diameter:  9.5mm
  • Length (pen tip to stylus tip):  131mm
  • 6mm diameter conductive rubber stylus tip that functions effortlessly with touchscreen devices.
6mm conductive tip makes writing on touchscreen devices effortless
6mm conductive tip makes writing on touchscreen devices effortless

  • Neodymium magnets attached to the cap ends.
Diametrically magnetized magnets attached to cap ends.
Diametrically magnetized magnets attached to cap ends.
  • Accepts Pilot Hi-Tec-C, Pilot G-2, Uniball Signo refills
Component Assembly
Component Assembly

Where Kickstarter Comes Into Play:

In order to make this project a successful one and bring the VR1 to the public, we need your support to help us reach our funding goal.  Your pledge will help us purchase the T-6061 aluminum and the conductive stylus tips at a bulk rate and will enable us to meet the minimum order requirements (MOQ's) for a production run of the VR1.  The main body of the VR1 and the caps will be manufactured in India and the final assembly will then be assembled in the USA.  Any support you can give is greatly appreciated and goes a long way in bringing the VR1 from concept to reality.  Thanks for stopping by!

***Please add $5 for domestic shipping and $10 for international shipping to your pledge***

FAQ

Have a question? If the info above doesn't help, you can ask the project creator directly.

Ask a question
51
Backers
$1,587
pledged of $20,000 goal
0
seconds to go

Funding Unsuccessful This project reached the deadline without achieving its funding goal on October 10, 2012.

Funding period
Sep 10, 2012 - Oct 10, 2012 (30 days)

  • Pledge $1 or more

    1 backer

    Thanks for the support! A little goes a long way!

    Estimated delivery: Dec 2012
  • Pledge $25 or more

    11 backers All gone!

    Early Bird Special. The first 250 backers will receive 1 VR1 in either raw aluminum, anodized black, blue, red, or silver. 1 Hi-Tec-C black refill will be included. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $25 or more

    33 backers Limited (206 of 239 left)

    Early Bird Special. The first 250 backers will receive 1 VR1 in either raw aluminum, anodized black, blue, red, or silver. 1 Hi-Tec-C black refill will be included. Please add $5 for domestic shipping and $10 for international shipping. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $30 or more

    0 backers Limited (1 of 1 left)

    The One Pack. Receive 1 VR1 in either raw aluminum, anodized black, blue, red, or silver. 1 Hi-Tec-C black refill will be included. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $30 or more

    1 backer

    The One Pack. Receive 1 VR1 in either raw aluminum, anodized black, blue, red, or silver. 1 Hi-Tec-C black refill will be included. Please add $5 for domestic shipping and $10 for international shipping. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $40 or more

    2 backers Limited (98 of 100 left)

    Kickstarter Green Limited Edition. Receive 1 VR1 in anodized Kickstarter green. 1 Hi-Tec-C black refill will be included, Please add $5 for domestic shipping and $10 for international shipping. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $60 or more

    1 backer

    The Two Pack. Receive 2 VR1's in any combination of raw aluminum, anodized black, blue, red, or silver. 2 Hi-Tec-C black refills will be included. Please add $5 for domestic shipping and $10 for international shipping. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $90 or more

    1 backer

    The Three Pack. Receive 3 VR1's in any combination of raw aluminum, anodized black, blue, red, or silver. 3 Hi-Tec-C black refills will be included.Please add $5 for domestic shipping and $10 for international shipping. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012
  • Pledge $140 or more

    0 backers

    The Five Pack. Receive 5 VR1's in any combination of raw aluminum, anodized black, blue, red, or silver. 5 Hi-Tec-C black refills will be included. Please add $5 for domestic shipping and $10 for international shipping. ***Receive an additional 5 stylus tips for every additional $5 pledged at this level.***

    Estimated delivery: Dec 2012