A creative new design that allows you to safely store one or more guitars in your closet while taking up minimal space.
A Better Way to Store Your Instrument
If you're like most guitar or bass players, you want your instrument to be stored safely out of the way while remaining easily accessible. Currently, there are two main types of guitar/bass supporting products on the market: stands and wall hangers. Stands support guitars well but take up lots of space and are often easy to tip over if you bump into them. Wall hangers get the guitar out of the way, but many people consider a guitar on the wall to be an unattractive choice. To those renting apartments, drilling into the wall also makes traditional wall hangers quite impractical.
For many, this relegates their guitar to being leaned against the wall in the closet, or tucked away in a case where it's difficult to get to on short notice. That's why we invented this very special guitar/bass hanger. It hangs in your closet, just like a hanger for a shirt or pants would. It hangs the guitar parallel to the clothing, so it takes up as little space as possible.
Shown Above: The Closet Guitar Hanger
Shown Above: A Stratocaster Hanging from the Closet Guitar Hanger
This product currently exists as only a few prototypes. If it doesn't reach its goal, it will not be produced. Why so? Well, if I made these by hand, I'd lose money selling them at $30 (shipped). To lower costs, we outsource production and do all of the assembly in-house (literally, ha!). So if you're wondering if you should get one now or later, remember that it may be now or never. We appreciate all of your support and know you'll love this simple but useful gadget. Many funding tiers have been provided for your convenience.Even a few are provided for store owners, in case you want to stock this design. Feel free to comment if you have ideas for new tiers. I love feedback!
Remember, kickstarter projects are dependent on reaching the goal. If the goal is not reached, you get your money back! If the goal IS reached, you get a cool new guitar hanger. So tell your friends, or be an awesome friend and just get them one too!
Something For Everyone!
The Closet Guitar Hanger can be useful to just about anyone with an instrument. Have a music room but too many guitars to keep in it? Turn the closet into a safe, compact place to store all of your valuable instruments. Want to hide your acoustic in your office? No problem, tuck it in right next to your coats. Moving into a dorm and want your room mate to keep their grubby mitts off of your baby? Just hide it away in the closet!
These even provide an interesting new way to keep inventory at music stores. Instead of expensive custom wall fixtures, you can mount a steel bar and use a few of these hangers to display your instruments. Since they rotate out (just like a coat hanger), it's easy to pick one guitar out even when others are hanging right next to it!
Shown Above: A bass guitar tucked away between some dress shirts.
Shown Above: An acoustic guitar and electric bass stored neatly in the closet
Show Some Love
Want to show your love for Kickstarter.com? We'll be offering an optional finish in Kickstarter Green for the first production run only. Just add $2 (to your donation) for each unit you'd like to come in Kickstarter Green (e.g., if you order 5 units and want 3 in Kickstarter Green, add $6 to your order).
The Mechanics of it
Of course this design looks very simple, but to design something like this is not as easy as making a loop with a hook to hang it from. You have to consider how the hanger will react to the weight of the instrument. The wire form that makes up the structural part of the hanger is designed such that the weight of the instrument actually tilts the "C" shaped neck holder up, making the neck slip firmly into the holder, thus reducing any chance of a mishap.
The hanger effectively has 2 hooks at the top instead of 1. So why do this instead of a single hook like a coat hanger? Well, by adding a 2nd supporting hook, the hanger becomes tremendously more stable. This allows the use of multiple hangers in a row without any concerns of instruments spinning and hitting one another. All you need to do to remove an instrument is pull the neck towards you and slide it off the hanger.
Shown Above: The Closet Guitar Hanger
Fitment and Construction
This hanger is designed to fit most electric and acoustic guitars and basses. It supports necks up to 60mm (2.36") wide, but tapers down to 50mm (1.97") wide for a better fit on smaller instruments. If your guitar fits on a conventional wall hanger, it will absolutely fit on this. The hanger provides 259mm (10.19") of clearance to the top of the headstock and hangs 288mm (11.34") below the hanger rod. The hanger is designed to fit hanger rods up to 40mm (1.57") in diameter.
Each hanger is constructed from 1/4" diameter cold-drawn carbon steel. After the hanger's frame is formed, a textured black powder coat finish is baked on for excellent scratch protection. Finally, a rubber sleeve and plastic cap are added to protect your instrument from scratches.
Each hanger is individually wrapped in a padded envelope. Hangers are shipped in a box (not individually packaged) to ensure they are not damaged in transit.
So Why Design A Guitar Hanger?
I love new design projects. Sure, designing a complex machine is very rewarding, but often finding a simple solution to a common problem is even more rewarding. There's beauty in simplicity, after all. I was tossing around different ideas for new projects, and this was one of the few that made everyone say "wow, I'd use that!" So I put the more complex projects on hold and decided to have a little fun with this idea.
My roots are in custom guitar building, but being around the automotive industry has put me in touch with manufacturers all over the globe. Mixing those two fields to create a piece like this felt like a very natural progression. My hopes are to get back into guitar building in the near future. This seemed like a great place to start..
Shown Above: Me planing what would later become a guitar body, back in my guitar building days.
Shown Above: A custom acoustic in progress, from when I used to build instruments.
Have a question? If the info above doesn't help, you can ask the project creator directly.
pledged of $10,000 goal
seconds to go
Funding Unsuccessful This project reached the deadline without achieving its funding goal on June 2, 2012.
May 3, 2012 - Jun 2, 2012 (30 days)
Pledge $5 or more
Want to see this product launch, but have no need for one right now? Contribute $5 and get your name listed on the ClosetGuitarHanger.com contributors page!Estimated delivery: Jul 2012
Pledge $30 or more
The Minimalist: 1 hanger shipped to you. *For international order, add $20 for shipping feesEstimated delivery: Aug 2012
Pledge $58 or more
The Deuce: 2 hangers shipped to you. *For international orders, add $20 for shipping feesEstimated delivery: Aug 2012
Pledge $85 or more
The Trifecta: 3 hangers shipped to you. *For international orders, add $20 for shipping feesEstimated delivery: Aug 2012
Pledge $111 or more
The Double Deuce: 4 hangers shipped to you. *For international orders, add $20 for shipping feesEstimated delivery: Aug 2012
Pledge $136 or more
The Hobbiest: 5 hangers shipped to you. *For international orders, add $25 for shipping feesEstimated delivery: Aug 2012
Pledge $270 or more
The Studio Package: 10 hangers shipped to you, a 10% savings. *For international orders, add $35 for shipping feesEstimated delivery: Aug 2012
Pledge $637 or more
Shop Level 1: 25 hangers shipped to you, a 15% savings. *For international orders, add $50 for shipping feesEstimated delivery: Aug 2012
Pledge $1,125 or more
Shop Level 2: 50 hangers shipped to you, a 25% savings . *For international orders, add $100 for shipping feesEstimated delivery: Aug 2012